For a correct use of Spirabelt, is important that all shoes are pressing uniformly on the belt, without tilting and with even pressure across the machine.

To make a check of the pressure applied by the shoes, proceed as follows:

To check if the “Hot Shoe” System is properly set-up:

  1. To do check, the plates must be hot and the shoe system in the down position.
  2. Place a strip of liner between the shoe and the belt.
  3. The liner should be snug, but able to be pulled out.

Checking correct pressure of shoes

Checking correct pressure of shoes

Powered by Sostanza ® S.r.l.